Tuesday, November 7, 2023
HomeHikingHyperlite Mountain Gear Mid-1 Tent Assessment

Hyperlite Mountain Gear Mid-1 Tent Assessment


Hyperlite Mountain Gear Mid 1 Tent Review

The Hyperlite Mountain Gear Mid-1 Tent is an ultralight single-wall Dyneema DCF tent that weighs 16.8 oz. It has a pyramid form with steep partitions and a really lengthy bathtub ground that makes it perfect for tall backpackers or these needing extra inside house. The ground is floating and connected to the tent partitions with noseeum mesh to reinforce airflow. The tent requires 1 trekking pole to pitch and comes with a carbon fiber pole jack to extend its size for the reason that tent’s dimensions are so outsized. The Mid 1 Tent is a cushty although minimalist shelter that’s good for tenting in protected tent websites, with loads of exterior guy-out factors to anchor it in windier situations. 

RELATED: 10 Greatest Ultralight Backpacking Tents

Specs at a Look

  • Capability: 1 Particular person
  • Kind: Single-Wall Trekking Pole Tent
  • Weight: 1.05 lbs | 16.80 oz. | 476.27 g
  • Minimal Variety of Stakes to Pitch: 6 | Advisable: September 11
  • Materials:  Dyneema DCF, Noseeum Mesh
  • Space: 21 Sq. Ft
  • Width: Exterior: 54″ or 137cm | Inside: 32″ or 81 cm
  • Size: Exterior: 107″ or 271cm | Inside: 96″ or 244 cm
  • Peak: 54″
  • Packed Dimensions: 8.5″ x 5.5″ x 5.5″

The Hyperlite Mountain Gear Mid 1 Tent is a single-wall pyramid tent, which means that it has a screened-off inside compartment with an connected bathtub ground that faces an inside vestibule house for gear storage. The tent is made with Dyneema DCF which is a powerful, waterproof, and ultralight materials that doesn’t sag when it will get moist, not like extra conventional tents made with siliconized nylon, siliconized polyester, or nylon with a polyurethane coating. The tent’s seams are all taped and the tent is waterproof out of the field.

The Mid 1 has a wide rear living area with sloped walls and a much narrower vestibule up front with steeper walls.
The Mid 1 has a large rear dwelling space with sloped partitions and a a lot narrower vestibule up entrance with steeper partitions.

The Mid 1 Tent has a really lengthy bathtub ground and steep aspect partitions designed to supply its occupant with further inside house. Pyramid tents and tarps, with their angled sides, usually have restricted inside top on the head and foot ends or sides as a result of their partitions are so sloped, which may result in a sense of claustrophobia in case your face is simply inches from the ceiling. The Mid 1 counters this with its lengthy bathtub ground (96″), so its occupant can sit in the midst of the ground and use the additional house on the ends for inside gear storage. For instance, if you happen to’re 6′ tall, you’d have an additional 1 foot of house above your warmth and beneath your ft for gear storage.

The Bathtub floor is 8’ long. So if you’re 6’ tall, there’s a foot of extra room above your head and below your feet for gear storage.
The Bathtub ground is 8’ lengthy. So if you happen to’re 6’ tall, there’s a foot of additional room above your head and beneath your ft for gear storage.

The Mid 1 Tent is a single-wall tent so it units up as a single unit with an built-in rain fly and inside ground. Whereas this helps maintain the load down, single-wall tents are extra susceptible to inner condensation which may make your gear and clothes moist if you happen to are available contact with the moist tent partitions. One of the simplest ways to scale back or stop inner condensation is to sleep with the doorways of a single-wall tent open, so air can movement by way of freely. That’s not all the time potential nonetheless on account of climate situations.

There is less headroom in the rear of the tent than in the front, next to the mesh and vestibule.
There may be much less headroom within the rear of the tent than within the entrance, subsequent to the mesh and vestibule.

The Mid 1 comes outfitted with precut guylines and line-loc tensioners alongside the bottom of the tent. Tent stakes usually are not included with the tent. We’d advocate utilizing pretty beefy tent stakes with the Mid-1 as a result of the tent partitions have a lot floor space and might they will catch a variety of wind, like a sail. The tent additionally comes with panel man out factors, which we advocate utilizing to assist broaden the inside house of the tent, notably if it’s windy, and assist stop inner condensation switch.

The Mid 1 has two guyout points that are positioned over the interior living area.
The Mid 1 has two man out factors which might be positioned over the inside dwelling space.

Precut guylines and tensioners usually are not included for these guyout factors and also you’ll want to provide your individual. When used, you have to an excellent bigger house to anchor the tent since their stakes will prolong nicely previous the perimeters of the underside of the tent.

Staking out the rear guy-outs helps increase internal space and wind resistance.
Staking out the rear guy-outs helps improve inner house and wind resistance, however requires extra space.

The Mid 1 tent has an offset design that’s wider above the sleeping space and narrower within the vestibule. The vestibule nonetheless has loads of house for gear storage and even cooking (fastidiously and with out an open flame) in poor climate. The vestibule doorways shut with a two-way waterproof zipper, which may be unzipped from the highest to reinforce airflow. The doorways may also be rolled again independently and have magnetic tiebacks that are a lot simpler to make use of than the cordlock/toggle affairs used on different tents.

The front vestibule has a two-way waterproof zipper
The entrance vestibule has a two-way waterproof zipper

The entrance vestibule has a two-way, waterproof zipper which is helpful throughout setup as a result of it enables you to insert your trekking pole into the highest peak with out having to open up your complete entrance door. That is helpful if it’s raining exterior as a result of it enables you to maintain the tent inside moderately dry. Whereas the tent peak is strengthened it’s designed to carry your trekking pole deal with. A 6″ pole jack is included with the Mid 1 to extend the size of your trekking pole to 54″: a pole jack is just a sleeve that matches across the tip of a trekking pole to provide it extra size. If you happen to lose it (it’s black), a conventional tent pole restore sleeve often does the trick. So does stacking gear, rocks, paperback books, and many others.

The peak of the tent has two large vents, like air scoops for channeling air inside.
The height of the tent has two giant vents, like air scoops for channeling air inside.

The height additionally has two giant coated vents, lined with noseeum netting inside, for extra airflow. They’re formed like scoops with stiffeners inside to forestall them from collapsing closed.

The front of the tent has one guy line which can be moved from one door to the other using special clips.
The entrance of the tent has one man line which may be moved from one door to the opposite utilizing particular clips.

The Mid 1 comes with a single guyline for staking out the vestibule and entrance of the tent. It’s situated on the backside of one of many vestibule doorways however may be simply moved and clipped to the opposite if you happen to solely need to maintain one of many doorways open at night time for air flow. Whereas that single stake gives a powerful anchor level when each vestibule doorways are zippered collectively, the Mid 1 turns into noticeably much less secure when one door is open and the opposite closed and much more unsteady if each vestibule doorways are unzipped and rolled again, opening up your complete entrance of the tent. To handle each these circumstances, I like to recommend including a guyline to the height and staking it out individually, with the webbing guy-out loop equipped there.

The bathtub floor in connected to the tent walls with mesh and floats inside.
The bath ground is related to the tent partitions with mesh and floats inside.

The size you set your pole to can differ a bit relying on how a lot air flow you want. In good climate, it’s good to have just a few inches of house between the underside fringe of the tent and the bottom to facilitate airflow. You may batten issues down tighter in heavy rain and convey the perimeters nearer to the bottom.

Special locking cordlocks are used to raise the walls of the bathtub floor.
Particular locking wire locks are used to lift the partitions of the tub ground.

The bath ground floats contained in the tent – which is helpful when pitching on uneven floor. It’s related to the inside partitions on three sides by noseeum mesh to forestall bugs and creepy crawlers from coming into. You may elevate the partitions of the tub ground to be extra vertical by adjusting locking wire locks across the perimeter that convey it nearer to the tent’s partitions. The entrance aspect of the tub ground is noticeably deeper than across the different three sides to forestall mud and moisture from blowing underneath the vestibule door and into the screened-in house.

The inside of the screened portion of the Mid 1 is fairly sparse. There may be one mesh pocket place alongside the tub ground on the middle of the tent beneath the noseeum zipper entry. Nevertheless, there aren’t any inside loops connected to the ceiling to droop damp clothes, grasp a headlamp, or grasp your glasses from so that they don’t by accident get crushed on the tent ground. I’d significantly think about including among the stick-on loops and hooks bought by Zpacks for his or her Dyneema shelters for this function. It can improve the inside livability.

The front of the bathtub floor is deeper than the rear to prevent dust and rain from blowing into the interior space.
The entrance of the tub ground is deeper than the rear to forestall mud and rain from blowing into the inside house.

Competitors

The closest competitor to the Hyperlite Mid 1 is the Zpacks Altaplex which is a 15.4 ozsingle wall, pyramid-shaped Dyneema DCF tent designed for taller hikers. Dimensionally, the 2 tents are fairly comparable though the inside of the Mid 1 is a half foot longer than the Altraplex whereas the Altaplex bathtub ground is 4″ wider than the Mid 1’s. As well as, the Altaplex has a deeper, extra structured bathtub ground and a wider door for coming into the internal tent, amongst different variations. It is usually about 10% dearer.

Advice

The Hyperlite Mountain Gear Mid 1 Tent is a single-wall Dyneema DCF tent that weighs 16.8 oz. Designed for taller hikers or individuals wanting extra inside house, it’s a spacious shelter appropriate to be used in protected campsites in addition to windy situations when totally guyed out. When contemplating whether or not to purchase the Mid 1, ask your self whether or not you’ll have enough space to set it up on the tent websites the place you intend to make use of it, because it has a big footprint if you happen to use all of the guy-out factors. As well as, it’s vital to notice that almost all Dyneema pyramid shelters, known as “Mids”, are modular tent methods with a separate pyramid-shaped tarp and non-obligatory internal tent. Single wall Mid’s, just like the Mid 1 Tent are nonetheless fairly uncommon, however may be advantageous when house or gear weight are paramount considerations.

Disclosure: Hyperlite Mountain Gear donated a tent for evaluate.

Evaluate 1 Costs

Final up to date: 2023-07-07 22:09:19

SectionHiker is reader-supported. We solely earn money if you are going to buy a product by way of our affiliate hyperlinks. Assist us proceed to check and write unsponsored and unbiased gear critiques, newbie FAQs, and free mountaineering guides.



Supply hyperlink

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments